Ipv4Settings contains the settings for the IPv4 protocol.

Note
The settings in Interface must be added in the following order: Ipv4Settings, Ipv6Settings, Identifier, UnicastIpAddresses, and then Routes. After saving your Unattend file in Windows SIM, verify in the XML file that the output is shown in the correct order, as shown in the XML example below.

Child Elements

DhcpEnabled

Specifies whether the Dynamic Host Configuration Protocol (DHCP) is enabled for the IPv4 protocol.

Metric

Specifies the interface metric used to distinguish between multiple matching routes of the same prefix length.

RouterDiscoveryEnabled

Specifies whether the router discovery protocol, which informs hosts of the existence of routers, is enabled for the IPv4 protocol.

Valid Configuration Passes

specialize

windowsPE

Parent Hierarchy

Applies To

For a list of the Windows® editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML Example

The following XML output shows how to configure TCPIP.

  Copy Code 
<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" --> <Interface wcm:action="add">
		 <Ipv4Settings>
			<DhcpEnabled>true</DhcpEnabled> 
			<Metric>20</Metric> 
			<RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
		 </Ipv4Settings>
		 <Ipv6Settings>
			<DhcpEnabled>false</DhcpEnabled> 
			<Metric>30</Metric> 
			<RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
		 </Ipv6Settings>
	<Identifier>Ethernet 1</Identifier>
		 <UnicastIpAddresses>
		 <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
		 <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
		 </UnicastIpAddresses>
		 <Routes>
			<Route wcm:action="add">
			 <Identifier>1</Identifier> 
			 <Metric>10</Metric> 
			 <NextHopAddress>12.34.0.0</NextHopAddress> 
			 <Prefix>16</Prefix> 
			</Route>
			<Route wcm:action="add">
			 <Identifier>10</Identifier> 
			 <Metric>29</Metric> 
			 <NextHopAddress>12.34.56.0</NextHopAddress> 
			 <Prefix>24</Prefix> 
			</Route>
		 </Routes>
	</Interface>
	<Interface wcm:action="add">
		 <Ipv4Settings>
			<DhcpEnabled>true</DhcpEnabled> 
			<Metric>20</Metric> 
			<RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
		 </Ipv4Settings>
		 <Ipv6Settings>
			<DhcpEnabled>false</DhcpEnabled> 
			<Metric>10</Metric> 
			<RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
		 </Ipv6Settings>
		 <Identifier>Local Area Connection</Identifier> 
		 <UnicastIpAddresses>
			<IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
			</UnicastIpAddresses>
		 <Routes>
			<Route wcm:action="add">
			 <Identifier>1</Identifier> 
			 <Metric>10</Metric> 
			 <NextHopAddress>12.34.0.0</NextHopAddress> 
			 <Prefix>16</Prefix> 
			</Route>
		 </Routes>
	</Interface>
   </Interfaces>
</component>

See Also

Concepts

Interface