Input Arguments |
Required |
Description |
<preferredDomainController>
|
Yes |
The domain controller to use for Active Directory actions. |
<identity>
|
Yes |
This parameter specifies the UM dial plan ID. This parameter is
the directory object identifier for the UM dial plan. This
parameter is used to link mailboxes to dial plans and Unified
Messaging servers to dial plans. |
<propertyList >
|
Yes |
The container for the list of properties. |
<property >
|
Yes |
The container for one or more properties to be set. |
<Name>
|
Yes |
The attribute of property node to define the property name the
value is being set for. |
<Value >
|
Yes |
The property node may contain one or more value nodes to enter
1 or an array of values. |
<accessTelephoneNumbers> |
No |
The parent container for accessTelephoneNumber node list. |
<accessTelephoneNumber> |
No |
One or more of these define the list of access or pilot phone
numbers. Range from 1 to 32 characters. |
<allowDialPlanSubscribers> |
No |
This parameter specifies whether to let subscribers in a dial
plan dial a number that resolves to another subscriber within the
same dial plan. The default is $true. |
<allowedInCountryGroups> |
No |
The parent container for countryGroup's nodes |
<inCountryGroup> |
No |
This parameter specifies the list of in-country/region dial
group names that are allowed. |
<allowedInternationalGroups> |
No |
The parent container for internationalGroup's nodes |
<internationalGroup> |
No |
This parameter specifies the list of international dial group
names that are allowed. |
<allowExtensions> |
No |
This parameter specifies whether callers can make calls to
extensions that have the same number of digits as the number that
is specified on the dial plan object. |
<audioCodec> |
No |
This parameter specifies the audio codec that is used for
recording. WMA is the default setting. |
<automaticSpeechRecognitionEnabled> |
No |
This parameter specifies whether speech recognition is enabled
for users who are members of the dial plan. |
<callSomeoneEnabled> |
No |
This parameter enables the Call Someone feature. |
<configuredInCountryGroups> |
No |
The parent container for one or more inCountryGroup nodes. |
<inCountryGroup> |
No |
This parameter specifies one in-country group that can be used.
Each node consists of four parts separated by commas:
- A group name (up to 32 characters) o
- AllowedNumber
- DialNumber
- TextComment
|
<configuredInternationalGroups> |
No |
The parent container for one or more internationalGroup
nodes. |
<internationalGroup> |
No |
This parameter specifies one international group that can be
used. Each node consists of four parts, separated by commas:
- A group name (up to 32 characters)
- AllowedNumber
- DialNumber
- TextComment
|
<contactAddressList> |
No |
The identity of the address list. |
<contactRecipientContainer> |
No |
The identity of the container that will be used for directory
searches. |
<contactScope> |
No |
This parameter specifies the scope of the search that will be
given callers |
<countryCode> |
No |
This parameter specifies the country code for a given country.
This is the number that will be dialed for a specific country. For
example, 1 in the United States. |
<defaultLanguage> |
No |
The system default language. Its default value is
USEnglish |
<dialByNamePrimary> |
No |
This parameter specifies the lookup key for dial by name. Its
default valueis Last, First. |
<dialByNameSecondary> |
No |
This parameter specifies the second dial by name lookup key.
Its default value is SMTP. |
<equivalenceDialPlan> |
No |
This parameter specifies the name of the equivalency dial plan
in another forest. When a telephony dial plan spans two forests and
when a second dial plan object is created, the GUID from the
original dial plan is copied to the user's proxy address in the
other forest. |
<extension> |
No |
The extension number |
<faxEnabled> |
No |
This parameter specifies whether the system supports faxing.
The Unified Messaging server will not load the fax components if
the dial plan does not support faxing. The default is $true. |
<fsdPollingInterval> |
No |
The interval, in minutes, between checks for new content made
by the File Distribution Service on the publishing point. The range
is from 1 to 1440 minutes. The default is 5 minutes. |
<inCountryNumberFormat> |
No |
This parameter specifies the prefix string to use and the
number of digits to take from the directory. This number is used
when dialing into this dial plan from within the same country
code. |
<infoAnnouncementEnabled> |
No |
This parameter enables the info announcement specified in
infoAnnouncementFileName. |
<infoAnnouncementFileName> |
No |
The wav file to the played for an info announcement |
<inputFailuresBeforeDisconnect> |
No |
This parameter specifies the number of sequential user input
errors that will be allowed before the call is disconnected. The
default is 3. |
<inputRetries> |
No |
This parameter specifies the number of times a caller can
re-enter input when the system times out. This applies to
authenticated users and also call answering or auto attendant
users. The default is 3. |
<inputTimeout> |
No |
This parameter specifies the length of time that the system
will wait for user input. This time limit applies to authenticated
users and also call answering or auto attendant users. The default
is 5 seconds. |
<internationalAccessCode> |
No |
This parameter specifies a value that will be prepended to a
number when dialing internationally. For example 011 or the
US. |
<internationalNumberFormat> |
No |
This parameter specifies the prefix string to use, and the
number of digits to take from the directory, when dialing into this
dial plan from a different country code. |
<logonFailuresBeforeDisconnect> |
No |
The number of unsuccessful logons before disconnecting the
call. Default is 3. |
<matchedNameSelectionMethod> |
No |
This parameter specifies the selection to use to differentiate
between users who have names that match the touchtone or speech
input. This setting can be set to the following:
- Department
- Title
- Location
- None
- Prompt for alias
- Inherited from UM dial plan
|
<maxCallDuration> |
No |
The maximum duration of a call before the call is dropped. |
<maxRecordingDuration> |
No |
The maximum time to record messages of any type. The default
value is 20 minutes. |
<name> |
No |
The new name for the dial plan. |
<nationalNumberPrefix> |
No |
This parameter specifies the code that is pre-appended to a
telephone number to dial out-of-area, in-country calls. For
example, 1 in North America. |
<ndrEnabled> |
No |
This parameter specifies whether UM call answering messages
that are submitted will request non-delivery reports (NDRs). If
this parameter is set to $false, messages will be submitted without
requests for NDRs. If this parameter is set to $true, the user
account specified on the VoiceMessageOriginator property must have
an Exchange mailbox. The default is $false. |
<operatorExtension> |
No |
This parameter specifies the extension number of the operator.
If this parameter is not specified, the Do Not Allow Transfer to
the Operator feature will be not available. |
<outsideLineAccessCode> |
No |
This parameter specifies the code that is pre-appended to a
telephone number to dial an external in-country telephone number.
This code is also called a trunk access code. The default is
9. |
<promptPublishingPoint> |
No |
This parameter specifies the UNC path of the server and share
where custom prompts will reside. The default path is set to the
first Unified Messaging server when it is added to a UM dial
plan. |
<recordingIdleTimeout> |
No |
The amount of time the caller can be silent before recording
stops. Default is 5 minutes. |
<sendVoiceMsgEnabled> |
No |
This parameter enables the Send Voice Message feature. |
<tuiPromptEditingEnabled> |
No |
This parameter specifies whether authorized users are permitted
to record UM dial plan or automated attendant prompts by using the
telephone user interface (TUI). The default setting is $false. |
<umAutoAttendant> |
No |
This parameter specifies the auto attendant that is executed
when the caller presses the star key (*). If this parameter is
specified, it will override the Call Someone feature. |
<voIPSecurity> |
No |
This parameter specifies whether Voice over IP (VoIP) security
will be used for the signaling channel, the signaling and media
channels, or neither channel. |
<welcomeGreetingEnabled> |
No |
This parameter specifies whether a custom Welcome greeting is
enabled. The default is $false. |
<welcomeGreetingFileName> |
No |
This parameter specifies the audio file name for the welcome
greeting. |