The Goto dialog box is a navigational helper. When sharing ETL files, a user might have already isolated the problem area. The Goto dialog box helps set up the main viewing area around the known problematic region. All times in this dialog box are in base measurement units; therefore, 10,000,000 is equal to one second.

The following figure shows the Goto dialog box when the Duration check box is selected.

In the preceding figure, the Start value is used for the left side of the main window. The Duration value corresponds to the amount of time that the main window displays from the start location.

The following figure shows the Goto dialog box when the Duration check box is cleared.

In the preceding figure, the Start value is used for the left side of the main window. The difference between the Start and End values corresponds to the amount of time for which the main window is displayed.

Note  If the Duration check box is cleared, the view and the operation of the Goto dialog box changes from the "Goto dialog box with Duration selected" figure to the "Goto dialog box with Duration cleared" figure.

If you know that the problematic area is 1 second long and 8.5 seconds into the file, you would set Start to 85,000,000, clear Use 64 ms Duration, and set the Duration text box to 10,000,000. These settings provide you with one second of time. Alternatively, you can clear the Duration check box and type both the start and end times in the Start and End text boxes, respectively.

The Save button records the current view so that you can restore the view later.

The Restore button applies the previously saved values.

The Goto button applies the view changes and exits the dialog box.

 

 

Send comments about this topic to Microsoft

Build date: 8/22/2011